WAVEOPTICS OUTDOOR CABLE ‣ FLAT DROP CABLES

Flat Drop Cable Configurator
Micro Flat Drop Cable Configurator
Flat Drop Indoor/Outdoor Cable Configurator
Sag and Tension Guide for Flat Drop Cables
Flat Drop Fiber Optic Cable FONCS

Flat Drop Cable

Close Tabs
Flat Drop Cable

Flat Drop Cable

Flat Drop Cable 12 Fibers Isometric View
Flat Drop Cable 12 Fibers Front View

Description

Waveoptics Flat Drop Cable designed for self-supporting, direct-buried and duct installations. Fully dielectric design, ideal for drop applications, offering ease of access as well as easy installation.


PE single jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.

Two parallel dielectric strength members that require no bonding or grounding, offering exceptional crush resistance. The FRP strength members are coated with EAA for improved adherence.

Applications

Protections

Physical Properties

Dimensions & PropertiesGel-Filled & Gel-Free
 Fiber per tube1 - 12
Dielectric strength member material / diameterEAA coated FRP / 1.5 mm (0.06 in)
 Outer jacket material Polyethylene
Nominal outer diameter8.1 mm x 4.5 mm (0.32 in x 0.18 in) (±5%)
 Loose tube material / diameter PBT / 3 mm (0.12 in)
 Drum length 5,000 ft ,10,000 ft, 15,000 ft  20,000 ft & 40,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation)10 x OD / 20 x OD
Rugged Flat Drop Cable

Rugged Flat Drop Cable

Rugged Flat Drop Cable 12 Fibers Isometric View
Rugged Flat Drop Cable 12 Fibers Front View

Description

Waveoptics Rugged Flat Drop Cable is designed for self-supporting, direct-buried and duct installations. Fully dielectric design, ideal for drop applications, offering ease of access as well as easy installation.


PE single jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.


This slightly more compact flat drop cable design is more robust and stiffer than the traditional flat drop cable because of its two parallel 2 mm dielectric strength members that significantly increase the impact and crush resistance properties of the cable, and require no bonding or grounding. The FRP strength members are coated with EAA for improved adherence.

Applications

Protections

Physical Properties

Dimensions & PropertiesGel-Filled & Gel-Free
 Fiber per tube1 - 12
Dielectric strength member material / diameterEAA coated FRP / 2 mm (0.08 in)
 Outer jacket material Polyethylene
Nominal outer diameter 7.8 mm x 4.3 mm (0.31 in x 0.17 in) (±5%)
 Loose tube material / diameter PBT / 2 mm (0.08 in)
 Drum length 5,000 ft ,10,000 ft, 15,000 ft  20,000 ft & 40,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD
Toneable Flat Drop Fiber Optic Cable FONCS

Toneable Flat Drop Cable

Close Tabs
Toneable Flat Drop Cable

Toneable Flat Drop Cable

Toneable Flat Drop Cable 12 Fibers Isometric View
Toneable Flat Drop Cable 12 Fibers Front View

Description

Waveoptics Toneable Flat Drop Cable designed for self-supporting, direct-buried and duct installations. Ideal for drop applications, offering ease of access as well as easy installation.


PE single jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.

Two parallel dielectric strength members that offer exceptional crush resistance.  The FRP strength members are coated with EAA for improved adherence.

Copper toning conductor allows effortless detection in direct-buried installation.

Applications

Protections

Physical Properties

Dimensions & PropertiesGel-Filled & Gel-free
 Fiber per tube1 - 12
Dielectric strength member material / diameterEAA coated FRP / 1.5 mm (0.06 in)
Toning conductor 24 AWG copper Wire
 Outer jacket material Polyethylene
Nominal outer diameter10.2 mm x 4.7 mm (0.4 in x 0.19 in) (±5%) 
 Loose tube material / diameter PBT / 3 mm (0.12 in)
 Drum length 5,000 ft ,10,000 ft, 15,000 ft  20,000 ft & 40,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD
Rugged Toneable Flat Drop Cable

Rugged Toneable Flat Drop Cable

Toneable Rugged Flat Drop Fiber Optic Cable 12 Fibers Isometric View
Toneable Rugged Flat Drop Fiber Optic Cable 12 Fibers Front View

Description

Waveoptics Toneable Rugged Flat Drop Cable is designed for self-supporting, direct-buried and duct installations. Ideal for drop applications, offering ease of access as well as easy installation.


PE single jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.


This slightly more compact flat drop cable design is more robust and stiffer than the traditional flat drop cable because of its two parallel 2 mm dielectric strength members that significantly increase the impact and crush resistance properties of the cable.  The FRP strength members are coated with EAA for improved adherence.


Copper toning conductor allows effortless detection in direct-buried installation.

Applications

Protections

Physical Properties

Dimensions & PropertiesGel-Filled & Gel-Free
 Fiber per tube1 - 12
Dielectric strength member material / diameterEAA Coated FRP / 2 mm (0.08 in)
Toning Conductor 24 AWG Copper Wire
 Outer jacket material Polyethylene
Nominal outer diameter 9.9 mm x4.3 mm (0.39 in x 0.17 in) (±5%)
 Loose tube material / diameter PBT / 2 mm (0.08 in)
 Drum length 5,000 ft ,10,000 ft, 15,000 ft, 20,000 ft & 40,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD
Flat Drop Indoor/Outdoor Simplex Fiber Optic Cable FONCS

Flat Drop Indoor/Outdoor Simplex Cable

Close Tabs
Flat Drop Indoor/Outdoor Simplex Cable

Flat Drop Indoor/Outdoor Simplex Cable

Flat Drop Indoor/Outdoor Simplex Cable 12 Fibers Isometric View
 Flat Drop Indoor/Outdoor Simplex Cable 12 Fibers Front View

Description

Waveoptics Flat Drop Indoor/Outdoor Simplex Cable is designed to meet the requirements for indoor/outdoor drop cables with a fully dielectric construction, simplifying the transition from the outdoor environment to an indoor Optical NetworkTerminal (ONT).

Small sub-unit diameter and bend radius that allows an easy installation in
space-constrained areas.

PE outer jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.

PVC Riser, PVC Plenum and LSZH inner jackets are available for the sub-unit that contains the optical fiber.

Two parallel dielectric strength members that require no bonding or grounding, offering exceptional crush resistance. The FRP strength members are coated with EAA for improved adherence.

Applications

Protections

Physical Properties

 Fiber per tube1
Dielectric strength member material / diameterEAA coated FRP / 1.5 mm (0.06 in)
 Outer jacket material Polyethylene
Tight buffer / inner jacket material PVC Riser, PVC Plenum & LSZH
 Drum length 5,000 ft ,10,000 ft, 15,000 ft  20,000 ft & 40,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD
Toneable Flat Drop Indoor/Outdoor Simplex Fiber Optic Cable FONCS

Toneable Flat Drop Indoor/Outdoor Simplex Cable

Close Tabs
Toneable Flat Drop Indoor/Outdoor Simplex Cable

Toneable Flat Drop Indoor/Outdoor Simplex Cable

Flat Drop Indoor/Outdoor Simplex Cable Isometric View
Flat Drop Cable Indoor/Outdoor Simplex Front View

Description

Waveoptics Toneable Flat Drop Indoor/Outdoor Simplex Cable is designed to meet the requirements for indoor/outdoor drop cables, simplifying the transition from the outdoor environment to an indoor Optical NetworkTerminal (ONT).

Small sub-unit diameter and bend radius that allow an easy installation in space-constrained areas.

PE outer jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.

PVC Riser, PVC Plenum and LSZH inner jackets are available for the sub-unit that contains the optical fiber.

Two parallel dielectric strength members that offer exceptional crush resistance. The FRP strength members are coated with EAA for  improved adherence.

Copper toning conductor allows effortless detection in direct-buried installation.

Applications

Protections

Physical Properties

 Fiber per tube1
Dielectric strength memberEAA coated FRP
Toning conductor 24 AWG copper wire
 Outer jacket material Polyethylene
Tight buffer / inner jacket material PVC Riser, PVC Plenum & LSZH
 Drum length 5,000 ft ,10,000 ft, 15,000 ft  20,000 ft & 40,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD
Micro Flat Drop Fiber Optic Cable FONCS

Micro Flat Drop Cable

Close Tabs
Micro Flat Drop Cable

Micro Flat Drop Cable

Micro Flat Drop Cable Isometric View
Micro Flat Drop Cable Front View

Description

Waveoptics Micro Flat Drop Cable is designed for self-supporting, direct-buried and duct installations. Fully dielectric design, ideal for drop applications, offering ease of access as well as easy installation. Compact and robust design provides ease of handling and also reduces transportation and storage costs. Available in 250 micron bare fiber and 900 micron tight-buffered fiber configurations.

Two parallel dielectric strength members that require no bonding or grounding, offering exceptional crush resistance. The FRP strength members are coated with EAA for improved adherence.

Applications

Protections

Physical Properties

 Fiber count1
Bare fiber / tight buffer diameters 0.25 mm / 0.9 mm
Dielectric strength member / diameterEAA coated FRP / 1.5 mm (0.06 in)
Outer jacket materialPolyethylene
Tight buffer material (900 um configuration) PVC Riser, PVC Plenum & LSZH
 Drum length 5,000 ft ,10,000 ft, 15,000 ft  20,000 ft & 40,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD
Toneable Micro Flat Drop Fiber Optic Cable FONCS

Toneable Micro Flat Drop Cable

Close Tabs
Toneable Micro Flat Drop Cable

Toneable Micro Flat Drop Cable

Toneable Micro Flat Drop Cable Isometric View
Toneable Micro Flat Drop Cable Front View

Description

Waveoptics Toneable Micro Flat Drop Cable is designed for self-supporting, direct-buried and duct installations. Ideal for drop applications, offering ease of access as well as easy installation. Compact and robust design provides ease of handling and also reduces transportation and storage costs. Available in 250 micron bare fiber and 900 micron tight-buffered fiber configurations.

Two parallel dielectric strength members that require no bonding or grounding, offering exceptional crush resistance. The FRP strength members are coated with EAA for improved adherence.

Copper toning conductor allows effortless detection in direct-buried installation.

Applications

Protections

Physical Properties

 Fiber count1
Bare fiber / tight buffer diameters 0.25 mm / 0.9 mm
Dielectric strength member / diameterEAA coated FRP / 1.5 mm (0.06 in)
Toning conductor 24 AWG copper wire
Outer jacket materialPolyethylene
Tight buffer material (900 um configuration) PVC Riser, PVC Plenum & LSZH
 Drum length 5,000 ft ,10,000 ft, 15,000 ft  20,000 ft & 40,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD