WAVEOPTICS OUTDOOR CABLE ‣ ADSS CABLES

ADSS Cable Configurator

Single Jacket ADSS Cables

ADSS Slim Fiber Optic Cable FONCS
Close Tabs
Single Jacket ADSS Slim Cable

Single Jacket ADSS Slim Cable

Single Jacket ADSS Slim Fiber Optic Cable 72 Fibers Isometric View
Single Jacket ADSS Slim Fiber Optic Cable 72 Fibers Front View

Description

Waveoptics Single Jacket ADSS Slim Cable is designed for self-supporting and duct applications for cable spans up to 1,050 feet, allowing an easy and cost-effective one-step installation using standard hardware and installation methods. Reduced weight design and smaller diameter allows the usage of smaller ducts.

PE single jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.

The SZ-stranded method for loose tubes and two ripcords ensure a quick and easy mid-span access.

Dielectric central strength member requires no bonding or grounding.

Aramid yarns have an excellent performance against high tension for direct-aerial installations, aerial to duct transitions and can be used for other applications that require added tensile performance such as long duct pulls. No messenger cable is required for installation, and no metallic components are used in ADSS cables.

Applications

Protections

Physical Properties

Dimensions & Properties Gel-Filled
 Fiber per tube2 - 12
Dielectric strength memberFRP
 Outer jacket material / thickness Polyethylene / 1.55 mm (0.06 in)
 Loose tube diameter 2.2 mm (0.09 in)
 Drum length 10,000 ft, 15,000 ft  & 20,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD  
Single Jacket ADSS Cable

Single Jacket ADSS Cable

Single Jacket ADSS Fiber Optic Cable 288 fibers Isometric View
Single Jacket ADSS Fiber Optic Cable 288 fibers Front View

Description

Waveoptics Single Jacket ADSS Cable is designed for self-supporting and duct applications for cable spans up to 1,050 feet, allowing an easy and cost-effective one-step installation using standard hardware and installation methods.

PE single jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.

The SZ-stranded method for loose tubes and two ripcords ensure a quick and easy mid-span access.

Dielectric central strength member requires no bonding or grounding.

Aramid yarns have an excellent performance against high tension for direct-aerial installations, aerial to duct transitions and can be used for other applications that require added tensile performance such as long duct pulls. No messenger cable is required for installation, and no metallic components are used in ADSS cables.

Applications

Protections

Physical Properties

Dimensions & Properties Gel-Filled & Gel-Free
 Fiber per tube2 - 12
Dielectric strength memberFRP
 Outer jacket material / thickness Polyethylene / 1.55 mm (0.06 in)
 Loose tube diameter 2.5 mm (0.09 in)
 Drum length 10,000 ft, 15,000 ft  & 20,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD  
Single Jacket ADSS Slim Track-Resistant Cable

Single Jacket ADSS Slim Track-Resistant Cable

ADSS Slim Track-Resistant Fiber Optic Cable 72 Fibers Isometric View
ADSS Slim Track-Resistant Fiber Optic Cable 72 Fibers Isometric View

Description

Waveoptics Single Jacket ADSS Slim Track-Resitant Cable is designed for self-supporting and duct applications for cable spans up to 1,050 feet, allowing an easy and cost-effective one-step installation using standard hardware and installation methods. Reduced weight design and smaller diameter allows a higher density of fiber using existing pole hardware.

Track-resistant PE (TRPE) single jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors. Available for high voltage transmission lines for the following electric field potential ranges: 12 kV to 25 kV and higher than 25 kV up to 400 kV.

The SZ-stranded method for loose tubes and two ripcords ensure a quick and easy mid-span access.

Dielectric central strength member requires no bonding or grounding.

Aramid yarns have an excellent performance against high tension for direct-aerial installations, aerial to duct transitions. No messenger cable is required for installation, and no metallic components are used in ADSS cables. These attributes allow the cable to be installed live-line and in the power space of distribution lines.

Applications

Protections

Physical Properties

Dimensions & Properties Gel-Filled
 Fiber per tube2 - 12
Dielectric strength memberFRP
 Outer jacket material / thickness Track-resistant polyethylene / 1.55 mm (0.06 in)
 Loose tube diameter 2.2 mm (0.09 in)
 Drum length 10,000 ft, 15,000 ft  & 20,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD  
Single Jacket ADSS Track-Resistant Cable

Single Jacket ADSS Track-Resistant Cable

ADSS Track-Resistant Fiber Optic Cable 288 Fibers Isometric View
ADSS Track-Resistant Fiber Optic Cable 288 Fibers Front View

Description

Waveoptics Single Jacket ADSS Track-Resistant Cable is designed for self-supporting applications for cable spans up to 1,050 feet, allowing an easy and cost-effective one-step installation using standard hardware and installation methods.

Track-resistant PE (TRPE) single jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors. Available for high voltage transmission lines for the following electric field potential ranges: 12 kV to 25 kV and higher than 25 kV up to 400 kV.

The SZ-stranded method for loose tubes and two ripcords ensure a quick and easy mid-span access.

Dielectric central strength member requires no bonding or grounding.

Aramid yarns have an excellent performance against high tension for direct-aerial installations, aerial to duct transitions. No messenger cable is required for installation, and no metallic components are used in ADSS cables. These attributes allow the cable to be installed live-line and in the power space of distribution lines.

Applications

Protections

Physical Properties

Dimensions & Properties Gel-Filled
 Fiber per tube2 - 12
Dielectric strength memberFRP
 Outer jacket material / thickness Track-resistant polyethylene / 1.55 mm (0.06 in)
 Loose tube diameter 2.5 mm (0.09 in)
 Drum length 10,000 ft, 15,000 ft  & 20,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 2,200 N/100mm  /  1,100 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD    
ADSS Fiber Optic Cable FONCS

Double Jacket ADSS Cables

Close Tabs
Double Jacket ADSS Slim Cable

Double Jacket ADSS Slim Cable

Double Jacket ADSS Slim Fiber Optic Cable 72 Fibers Isometric View
Double Jacket ADSS Slim Fiber Optic Cable 72 Fibers Front View

Description

Waveoptics Double Jacket ADSS Slim Cable is designed for self-supporting and duct applications for cable spans up to 1,050 feet, allowing an easy and cost-effective one-step installation using standard hardware and installation methods. Reduced weight design and smaller diameter allows the usage of smaller ducts.

PE double jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.

The SZ-stranded method for loose tubes and four ripcords ensure a quick and easy mid-span access.

Dielectric central strength member requires no bonding or grounding.

Aramid yarns have an excellent performance against high tension for direct-aerial installations, aerial to duct transitions and can be used for other applications that require added tensile performance such as long duct pulls. No messenger cable is required for installation, and no metallic components are used in ADSS cables.

Applications

Protections

Physical Properties

Dimensions & Properties Gel-Filled
 Fiber per tube2 - 12
Dielectric strength memberFRP
 Outer jacket material / thickness Polyethylene / 1.55 mm (0.06 in)
Inner jacket material / thickness Polyethylene / 0.8 mm (0.03 in)
 Loose tube diameter 2.2 mm (0.09 in)
 Drum length 10,000 ft, 15,000 ft  & 20,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 3,000 N/100mm  /  1,500 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD  
Double Jacket ADSS Cable

Double Jacket ADSS Cable

Double Jacket ADSS Fiber Optic Cable 288 Fibers Isometric View
Double Jacket ADSS Fiber Optic Cable 288 Fibers Front View

Description

Waveoptics Double Jacket ADSS Cable is designed for self-supporting and duct applications for cable spans up to 1,050 feet, allowing an easy and cost-effective one-step installation using standard hardware and installation methods.

PE double jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors.

The SZ-stranded method for loose tubes and four ripcords ensure a quick and easy mid-span access.

Dielectric central strength member requires no bonding or grounding.

Aramid yarns have an excellent performance against high tension for direct-aerial installations, aerial to duct transitions and can be used for other applications that require added tensile performance such as long duct pulls. No messenger cable is required for installation, and no metallic components are used in ADSS cables.

Applications

Protections

Physical Properties

Dimensions & Properties Gel-Filled & Gel-Free
 Fiber per tube2 - 12
Dielectric strength memberFRP
 Outer jacket material / thickness Polyethylene / 1.55 mm (0.06 in)
Inner jacket material / thickness Polyethylene / 0.8 mm (0.03 in)
 Loose tube diameter2.5 mm (0.09 in)
 Drum length 10,000 ft, 15,000 ft  & 20,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 3,000 N/100mm  /  1,500 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD  
Double Jacket ADSS Slim Track-Resistant Cable

Double Jacket ADSS Slim Track-Resistant Cable

Double Jacket ADSS Slim Track-Resistant Fiber Optic Cable 72 Fibers Isometric View
Double Jacket ADSS Slim Track-Resistant Fiber Optic Cable 72 Fibers Front View

Description

Waveoptics Double Jacket ADSS Slim Track-Resistant Cable is designed for self-supporting applications for cable spans up to 1,050 feet, allowing an easy and cost-effective one-step installation using standard hardware and installation methods. Reduced weight design and smaller diameter allows a higher density of fiber using existing pole hardware.

Track-resistant PE (TRPE) double jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors. Available for high voltage transmission lines for the following electric field potential ranges: 12 kV to 25 kV and higher than 25 kV up to 400 kV.

The SZ-stranded method for loose tubes and four ripcords ensure a quick and easy mid-span access.

Dielectric central strength member requires no bonding or grounding.

Aramid yarns have an excellent performance against high tension for direct-aerial installations, aerial to duct transitions and can be used for other applications that require added tensile performance such as long duct pulls. No messenger cable is required for installation, and no metallic components are used in ADSS cables. These attributes allow the cable to be installed live-line and in the power space of distribution lines.

Applications

Protections

Physical Properties

Dimensions & Properties Gel-Filled
 Fiber per tube2 - 12
Dielectric strength memberFRP
 Outer jacket material / thicknessTrack-resistant polyethylene / 1.55 mm (0.06 in)
Inner jacket material / thickness Polyethylene / 0.8 mm (0.03 in)
 Loose tube diameter 2.2 mm (0.09 in)
 Drum length 10,000 ft, 15,000 ft  & 20,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 3,000 N/100mm  /  1,500 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD  
Double Jacket ADSS Track-Resistant Cable

Double Jacket ADSS Track-Resistant Cable

Double Jacket ADSS Track-Resistant Fiber Optic Cable 288 Fibers Isometric View
Double Jacket ADSS Track-Resistant Fiber Optic Cable 288 Fibers Front View

Description

Waveoptics Double Jacket ADSS Track-Resistant Cable is designed for self-supporting applications for cable spans up to 1,050 feet, allowing an easy and cost-effective one-step installation using standard hardware and installation methods.

Track-resistant PE (TRPE) double jacket with additives makes a resistant, durable and easy to strip cable, providing superior protection against UV radiation, fungus, abrasion and other environmental factors. Available for high voltage transmission lines for the following electric field potential ranges: 12 kV to 25 kV and higher than 25 kV up to 400 kV.

The SZ-stranded method for loose tubes and four ripcords ensure a quick and easy mid-span access.

Dielectric central strength member requires no bonding or grounding.

Aramid yarns have an excellent performance against high tension for direct-aerial installations, aerial to duct transitions. No messenger cable is required for installation, and no metallic components are used in ADSS cables. These attributes allow the cable to be installed live-line and in the power space of distribution lines.

Applications

Protections

Physical Properties

Dimensions & Properties Gel-Filled
 Fiber per tube2 - 12
Dielectric strength memberFRP
 Outer jacket material / thickness Track-resistant polyethylene / 1.55 mm (0.06 in)
Inner jacket material / thickness Polyethylene / 0.8 mm (0.03 in)
 Loose tube diameter 2.5 mm (0.09 in)
 Drum length 10,000 ft, 15,000 ft  & 20,000 ft (±5%)
 Operation temperature range  -40°C to 70°C (-40°F to 158°F)
 Installation temperature range -30°C to 70°C (-22°F to 158°F)
 Storage / transport temperature range -40°C to 70°C (-40°F to 158°F)

Mechanical Properties

Crush resistance (short-term / long-term)
 3,000 N/100mm  /  1,500 N/100mm
Minimum bend radius (operation / installation) 10 x OD / 20 x OD